Time reversal for obstacle location in elastodynamics from acoustic recording

The Note is concerned with a feasibility study of time reversal in a non-homogeneous elastic medium, from data recorded in an acoustic medium. Our aim here is to determine the presence and some physical properties of elastic “inclusions” (unknown, not observable solid objects, characterized by their elastic properties) from partial observations of acoustic waves scattered by these inclusions. A finite element numerical method, based on a variational acousto-elastodynamics formulation, is derived and used to solve the forward, and then, the time-reversed problem. A criterion, derived from the reverse time migration framework, is introduced, to help construct images of the inclusions to be determined. Numerical illustrations on configurations that mimic the breast cancer configuration are proposed, and show that one can differentiate between two inclusions, even with different properties.     

振型归一化对梁结构柔度曲率损伤指标的影响

结构柔度矩阵需由质量矩阵归一化振型获得,而质量矩阵归一化振型难以直接测得,限制了柔度曲率类损伤指标的应用。为分析振型归一化方法对梁结构柔度曲率类损伤指标的影响,根据梁结构的刚度、弯矩和位移曲率的关系,建立了均布荷载作用下结构损伤前后位移曲率与损伤程度的理论表达式,实现定量分析均匀荷载面曲率结构损伤程度。提出P-范数振型归一化方法,通过均匀荷载面曲率指标推导了振型质量矩阵归一化系数差x_α与损伤程度的关系。以三跨连续梁算例对理论进行了验证,结果表明,损伤程度定量指标效果良好,不同P-范数振型归一化方法下,损伤程度的偏差可由2x_α估算;2-范数振型归一化方法的损伤识别结果与质量矩阵振型归一化结果最接近,故当无法获得质量矩阵归一化振型时,可采用2-范数归一化振型代替。     

The study of wave motion in the Talbot interferometer with a lens

We present the study of the wave motion in the Talbot interferometer with an additional element such as a lens for all related audiences. Our solutions are in the analytic form. A general principle of the Talbot effect, which is the optical near-field effect, is the Fresnel diffraction. The Fresnel integral is rather complicated. We therefore introduce an alternative method which is based on the wave propagation through the transmission functions of the grating and the lens. Our method has been proved by a simple experimental setup.     

Cold,warm, and hot programming of shape memory polymers

In this article, programming is classified as hot, warm, and cold, based on the temperature zone within which the programming is conducted. The strain and stress locking and releasing mechanisms are discussed within the thermodynamics framework. A new formula is developed for quantifying the strain recovery ratio of cold-programmed SMPs. Stress fixity ratio and stress recovery ratio are also defined based on the understanding of stress locking and recovery mechanisms. State-of-the-art literature on warm and cold programming is reviewed. Well-controlled programming as well as free strain recovery test and constrained stress recovery test are conducted, in order to validate the memory mechanisms discussed in this study. It is found that, while programming temperature has an insignificant effect on the final free shape recovery, it has a significant effect on the stress recovery. The recovery stress programmed by cold programming may be lower, equal to, or higher than that by hot programming, due to the different stress locking mechanisms and other factors such as damage during the thermomechanical cycle. Cold, Warm, and Hot Programming of Shape Memory Polymers © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 1319–1339     

Modeling the Effect of Injection Molding Process Parameters on Warpage Using Neural Network Theory

A back propagation artificial neural network (BPANN) prediction model for warpage of injection-molded polypropylene was developed based on an orthogonal design method. The BPANN model was trained by the input and output data obtained from the moldflow software platform simulations. It is proved that the BPANN model can predict the warpage with reasonable accuracy. Utilizing the BPANN model, the effects of the process parameters, packing pressure (Pp), melt temperature (T_me), mold temperature (T_mo), packing time (t_p), cooling time (t_c), and fill pressure (p_f), on the warpage were investigated. The most important process parameter affecting the warpage was Pp, and the second most important was T_me. The rest of the process parameters, T_mo, t_p, t_c, and p_f, were found to be relatively less influential. Warpage increased with elevating T_mo. In contrast, an increase in Pp and T_me caused the warpage to decrease.     

Radiation damage in polymer films from grazing‐incidence X‐ray scattering measurements

Grazing‐incidence X‐ray scattering (GIXS) is widely used to analyze the crystallinity and nanoscale structure in thin polymer films. However, ionizing radiation will generate free radicals that initiate crosslinking and/or chain scission, and structural damage will impact the ordering kinetics, thermodynamics, and crystallinity in many polymers. We report a simple methodology to screen for beam damage that is based on lithographic principles: films are exposed to patterns of X‐ray radiation, and changes in polymer structure are revealed by immersing the film in a solvent that dissolves the shortest chains. The experiments are implemented with high throughput using the standard beam line instrumentation and a typical GIXS configuration. The extent of damage (at a fixed radiation dose) depends on a range of intrinsic material properties and experimental variables, including the polymer chemistry and molecular weight, exposure environment, film thickness, and angle of incidence. The solubility switch for common polymers is detected within 10–60 s at ambient temperature, and we verified that this first indication of damage corresponds with the onset of network formation in glassy polystyrene and a loss of crystallinity in polyalkylthiophenes. Therefore, grazing‐incidence X‐ray “patterning” offers an efficient approach to determine the appropriate data acquisition times for any GIXS experiment. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 1074–1086     

A study of the effect of step excrescences and free‐stream disturbances on boundary layer stability

In this work, a study of the mechanism by which free‐stream acoustic and vorticity disturbances interact with a boundary layer flow developing over a flat plate featuring a step excrescence located at a certain distance from a blunt leading edge is included. The numerical tool is a high‐fidelity implicit numerical algorithm solving for the unsteady, compressible form of the Navier–Stokes equations in a body‐fitted curvilinear coordinates and employing high‐accurate compact differencing schemes with Pade‐type filters. Acoustic and vorticity waves are generated using a source term in the momentum and energy equations, as opposed to using inflow boundary conditions, to avoid spurious waves that may propagate from boundaries. The results show that the receptivity to surface step excrescences is largely the result of an overall adverse pressure gradient posed by the step, and that the free‐stream disturbances accelerate the generation of instabilities in the downstream. As expected, it is found that the acoustic disturbance interacting with the surface imperfection is more efficient in exciting the Tollmien–Schlichting waves than the vorticity disturbance. The latter generates Tollmien–Schlichting waves that are grouped in wave packets consistent with the wavelength of the free‐stream disturbance. Copyright © 2015 John Wiley & Sons, Ltd.     

Can a Six‐Letter Alphabet Increase the Likelihood of Photochemical Assault to the Genetic Code?

In 2014, two unnatural nucleosides, d5SICS and dNaM, were shown to selectively base pair and replicate with high fidelity in a modified strain of E. coli, thus effectively expanding its genetic alphabet from four to six letters. More recently, a significant reduction in cell proliferation was reported in cells cultured with d5SICS, and putatively with dNaM, upon exposure to brief periods of near‐visible radiation. The photosensitizing properties of the lowest‐energy excited triplet state of both d5SICS and dNaM were implicated in their cytotoxicity. Importantly, however, the excited‐state mechanisms by which near‐visible excitation populates the triplet states of d5SICS and dNaM are currently unknown. In this study, steady‐state and time‐resolved spectroscopies are combined with quantum‐chemical calculations in order to reveal the excited‐state relaxation mechanisms leading to efficient population of the triplet states in these unnatural nucleosides in solution. It is shown that excitation of d5SICS or dNaM with near‐visible light leads overwhelmingly to ultrafast population of their triplet states on the femtosecond time scale. The results presented in this work lend strong support to the proposal that photoexcitation of these unnatural nucleosides can accelerate oxidatively generated damage to DNA and other biomolecules within the cellular environment.     

Acoustoelastic effect simulation by time–space finite element formulation based on quadratic interpolation of the acceleration

Acoustoelastic effect describes the change of ultrasound velocity due to the initial stress. Its simulation involves a numerical analysis of nonlinear elastodynamics and requires high accuracy in the time domain. A time–space finite element formulation, derived from the quadratic interpolation of the acceleration within a time segment, is proposed for an accurate simulation of the acoustoelastic effect in the present study. Ten different integration schemes are generated based on this formulation and nine of them are found to be conditionally stable. Among the nine stable schemes, one is found to obtain a spectral radius of one when the normalized step ratio is less than 5.477, indicating no numerical dissipation or numerical divergence. Compared with integration schemes from previous studies, this integration scheme demonstrates better performance in calculation accuracy and energy conservation. A two-stage approach, namely the static stage and the dynamic stage, has been employed in the simulation of the acoustoelastic effect. The former stage is adopted to obtain the initial stress and the latter stage, where the proposed integration scheme is implemented, is adopted to simulate the ultrasound propagation in an initial stress state. The simulation results of the dynamic stage show that the ultrasound velocity increases in a compression stress state and decreases in a tension stress state for aluminum alloy, which is in good agreement with previous experimental studies. Together with the simulation result of the static stage, it is conjectured that the acoustoelastic effect results from the stress-dependent elastic modulus.     

表面效应对铁<100>间隙型位错环的影响

在材料辐照损伤过程中,间隙型位错环的形成及动力学行为严重影响材料在辐照条件下的服役行为.在常用的以体心立方铁为基的合金材料中,1/2<111>和<100>是两种主要的位错环,其对辐照损伤的影响一直都是核材料领域研究的热点之一.在之前的研究中,人们对{111}面与单个1/2<111>位错环的相互作用进行了深入研究,发现表面对位错环性质确实有重要的影响.采用分子动力学方法,在原子尺度详细研究了另一个重要的表面铁{100}面对<100>间隙型位错环动力学过程的影响.模拟发现位错环伯格斯矢量与表面法线方向的关系、距表面的深度、位错环之间的相互作用以及温度等,都对位错环与表面的相互作用产生重要影响,其中,表面作用下的伯格斯矢量的演化以及<100>位错环在此过程中的一维运动首次被发现.基于这些模拟结果,就<100>位错环对表面辐照损伤结构的影响进行详细地研究,给出<100>位错环对表面凹凸结构的贡献,这些结果为理解辐照过程中材料表面的演化提供一种可能的解释.